The fluid is distributed and the flow is visible.
The fluid can be distributed to each branch pipe.
We can manufacture distribution branch pipes ranging from 2 to 14.
The fluid flow can be visually confirmed.
We can manufacture distribution branch pipes ranging from 2 to 14.
The fluid flow can be visually confirmed.
With flow control valve
By using the red line on the tapered transparent tube as a guide, you can adjust the valves on each branch tube while observing the position of the ball.
*When placing an order or requesting a quote□Please specify your choice.
 | PDF download (1178KB) |
Number of branch pipes□Our (2 to 14 bottles) | FITV- | Branch pipe connection method□ (φ6, φ8, φ10) (Rc1/8, Rc1/4, Rc3/8) (R1/8, R1/4, R3/8) | Flow rate of each branch pipe□L / min Per branch pipe Settable flow rate range Approximately 100cc/min to 3.6L/min | Types of oil□ (or viscosity of oil)□cSt) |
Example: 8FITV-Rc1/8 Flow rate of 1L per branch pipe Oil type ISOVG32
*Depending on your usage flow rate, the number of branch pipes may be limited.
*Please contact us if the flow rate exceeds the maximum flow rate that can be set per branch pipe.
*The holder can also be manufactured with an Rc3/4 or Rc1 opening.
(In the above case, we may change the model number. Please contact us for details.)
Standard specifications
holder | FC20 |
Fitting | C3604 |
Transparent tapered tube | Acrylic |
ball | SUJ or Nylon |
adapter | C3604 |
O-ring | Nitrile rubber |
Spring | SUS304 |
communication pipe | C3604 |
Miniature bulb | BC |
