The flow is visible at a glance.
This is a current galvanometer that checks the flow of fluid by observing the movement of a ball (or float) inside a transparent tube.
The flow rate cannot be confirmed.
This is a current galvanometer that checks the flow of fluid by observing the movement of a ball (or float) inside a transparent tube.
The flow rate cannot be confirmed.
Lightweight aluminum protective cover included
By using cast aluminum, the strength remains the same as the conventional product (MKC type), while the weight has been reduced by more than 50%.
The mounting direction does not matter.
Because it uses a spring inside, you can freely adjust the mounting position to upward, downward, or sideways.
By using cast aluminum, the strength remains the same as the conventional product (MKC type), while the weight has been reduced by more than 50%.
The mounting direction does not matter.
Because it uses a spring inside, you can freely adjust the mounting position to upward, downward, or sideways.
Model List
Model | Dimensions (mm)[[Due to the casting surface, there may be individual variations in dimensions.] | Standard flow rate (L/min) | ||||
Connection port diameter | Length | Width | Depth | Minimum | maximum | |
MKA20-1TW | Rc1/8 | 80 | 30 | 22 | 0.6 | 6 |
MKA20-2TW | Rc1/4 | 80 | 30 | 22 | 0.6 | 6 |
MKA20-3TW | Rc3/8 | 86 | 30 | 22 | 0.6 | 6 |
MKA30-2TW | Rc1/4 | 100 | 44 | 32 | 2 | 20 |
MKA30-3TW | Rc3/8 | 104 | 44 | 32 | 2 | 20 |
MKA30-4TW | Rc1/2 | 110 | 44 | 32 | 2 | 20 |
MKA35-4TW | Rc1/2 | 124 | 49 | 44 | 5 | 30 |
MKA35-6TW | Rc3/4 | 124 | 49 | 44 | 5 | 30 |
MKA45-6TW | Rc3/4 | 142 | 62 | 50 | 15 | 60 |
MKA45-8TW | Rc1 | 142 | 62 | 50 | 15 | 60 |
*Supplementary information regarding the model number
When the connection inlet and outlet are R-shaped male threads, the model number will be MKA□□-□TOW. Example: MKA20-3TOW
When the connection port is an R-type male thread, the model number will be MKA□□-□TOMW. Example: MKA20-3TOMW
When the connection outlet is an R-type male thread, the model number will be MKA□□-□TMOW. Example: MKA20-3TMOW
When the connection port is an R-type male thread, the model number will be MKA□□-□TOMW. Example: MKA20-3TOMW
When the connection outlet is an R-type male thread, the model number will be MKA□□-□TMOW. Example: MKA20-3TMOW
Standard specifications
Fluid | Wed | ||
flow | See above | Please contact us if you require a flow rate below or above the standard specification. | |
Connection | Rc female thread | Change to R male thread It can also be used in combination with an R-type male thread. | |
Eur-lex.europa.eu eur-lex.europa.eu | Maximum 80℃ | Heat-resistant versions (up to 120°C) are also available. | |
pressure resistance | 1MPa | - | |
Material | transparent tube | Acrylic | The heat-resistant version uses Pyrex glass. |
Protective covers | Cast aluminum | For gunmetal models, please choose the MKC type. | |
Fitting | C3604 (brass) | We can also manufacture them in stainless steel (SUS). | |
Spring | SUS304 | - | |
Nylon ball | Nylon 66 | Cylindrical floats may also be used. | |
O-ring | Nitrile rubber | The heat-resistant version uses fluororubber. | |