Flow rate can be seen visually.
Because a transparent tapered tube is used, it is possible to check the approximate flow rate by looking at the relationship between the ball (or float) and the indicated red line.
With protective cover
The metal protective cover reduces the possibility of damage from external impacts.
The mounting direction does not matter.
Because it uses a spring inside, you can freely adjust the mounting position to upward, downward, or sideways.
Because a transparent tapered tube is used, it is possible to check the approximate flow rate by looking at the relationship between the ball (or float) and the indicated red line.
With protective cover
The metal protective cover reduces the possibility of damage from external impacts.
The mounting direction does not matter.
Because it uses a spring inside, you can freely adjust the mounting position to upward, downward, or sideways.
 | PDF download (846KB) |
Model List
Model | Dimensions (mm) The overall width varies from piece to piece due to the cast surface. | Standard flow rate (approx. L/min) | Flow curve table *Standard specifications (PDF document) | |||
Connection | Length | Width | Depth | |||
MKCT20-1TW | Rc1/8 | 80 | 30 | 22 | 1 to 5 |  |
MKCT20-2TW | Rc1/4 | 80 | 30 | 22 | ||
MKCT20-3TW | Rc3/8 | 86 | 30 | 22 | ||
MKCT30-2TW | Rc1/4 | 100 | 44 | 32 | 4 to 17 |  |
MKCT30-3TW | Rc3/8 | 104 | 44 | 32 | ||
MKCT30-4TW | Rc1/2 | 110 | 44 | 32 | ||
MKCT35-4TW | Rc1/2 | 148 | 50 | 44 | 8 to 30 | |
MKCT35-6TW | Rc3/4 | 148 | 50 | 44 | ||
MKCT45-6TW | Rc3/4 | 171 | 62 | 50 | 10 to 40 | |
MKCT45-8TW | Rc1 | 171 | 62 | 50 | ||
When ordering or requesting a quote□Please specify your choice.
Model MKCT□□-□TW | Regular flow rate □L / min |
Example: MKCT20-2TW normal flow rate 3L/min
*Supplementary information regarding the model number
When the connection inlet and outlet are R-type male threads, the model number will be MKCT□□-□TOW. Example: MKCT20-3TOW
When the connection port has an R-shaped male thread, the model number will be MKCT□□-□TOMW. Example: MKCT20-3TOMW
When the connection outlet is an R-type male thread, the model number will be MKCT□□-□TMOW. Example: MKCT20-3TMOW
*Supplementary information regarding the model number
When the connection inlet and outlet are R-type male threads, the model number will be MKCT□□-□TOW. Example: MKCT20-3TOW
When the connection port has an R-shaped male thread, the model number will be MKCT□□-□TOMW. Example: MKCT20-3TOMW
When the connection outlet is an R-type male thread, the model number will be MKCT□□-□TMOW. Example: MKCT20-3TMOW
Fluid | Wed | ||
flow | See above | Please contact us if you require a flow rate below or above the standard specification. | |
Connection | Rc female thread | Change to R male thread It can also be used in combination with an R-type male thread. | |
Eur-lex.europa.eu eur-lex.europa.eu | Maximum 80℃ | - | |
pressure resistance | 1MPa | - | |
Material | transparent tube | Acrylic | - |
Fitting | C3604 (brass) | We can also manufacture them in stainless steel (SUS). | |
Protective covers | BC | We can also manufacture them in aluminum. | |
Spring | SUS304 | - | |
Nylon ball | Nylon 66 | Cylindrical floats may also be used. | |
O-ring | Nitrile rubber | - | |