Low flow rate type
Observe the dripping situation as the oil is supplied by a nozzle installed inside the transparent tube.
It is possible to check for low flow rates.
Observe the dripping situation as the oil is supplied by a nozzle installed inside the transparent tube.
It is possible to check for low flow rates.
Regarding the model number (□Please choose one of the following options.
MKD □ × □ Nozzle diameter □
MKD □ × □ Nozzle diameter □
 | PDF download (421KB) |
Model | Entrance connection | × | Exit connection | Nozzle diameter |
MKD | φ4, φ6, φ8 | φ4, φ6, φ8 | φ1, φ2, φ3, φ4 | |
Rc1/8, Rc1/4, Rc3/8 | Rc1/8, Rc1/4, Rc3/8 | |||
R1/8, R1/4, R3/8 | R1/8, R1/4, R3/8 |
Example: MKD Rc1/8×Rc1/8 Nozzle diameter φ2
*If no nozzle diameter is specified, it will be φ1.
*Air vents can also be provided in the transparent tube.
*If no nozzle diameter is specified, it will be φ1.
*Air vents can also be provided in the transparent tube.
Standard size specifications
Fluid | oil | ||
Connection | See above | ||
Eur-lex.europa.eu eur-lex.europa.eu | Maximum 80℃ | ||
pressure resistance | 1MPa | ||
Material | transparent tube | Acrylic | |
Dropping nozzle | C3604 | ||
Fitting | C3604 | ||
