[Visualizing flow rate]
The transparent tapered tube allows you to easily observe the fluid flow.
We support the early detection of equipment malfunctions and flow rate drops.
[Flexible mounting position]
It can be installed vertically, horizontally, or upside down.
This increases the flexibility of piping design and solves installation space limitations.
 | MKT type download (1197KB) |
Standard product (ball specification)
Model List
Model | Dimensions (mm) | Standard flow rate (L/min) | ||
Connection port diameter | Length | Width | ||
MKT25-1TA | Rc1/8 | 78 | 25 | 50 to 200 |
MKT25-2TA | Rc1/4 | 78 | 25 | 50 to 200 |
MKT25-3TA | Rc3/8 | 84 | 25 | 50 to 200 |
MKT30-2TA | Rc1/4 | 100 | 30 | 100 to 400 |
MKT30-3TA | Rc3/8 | 104 | 30 | 100 to 400 |
MKT30-4TA | Rc1/2 | 110 | 30 | 100 to 400 |
For low flow rates (float type)
Model List
Model | Dimensions (mm) | Standard flow rate (L/min) | ||
Connection port diameter | Length | Width | ||
MKT25-1TFA | Rc1/8 | 78 | 25 | 1 to 10 |
MKT25-2TFA | Rc1/4 | 78 | 25 | 1 to 10 |
MKT25-3TFA | Rc3/8 | 84 | 25 | 1 to 10 |
When ordering or requesting a quote□Please specify your choice.
Model MKT□□-□TA | Regular flow rate □L / min |
Example: MKT25-2TA normal flow rate 100L/min
*Supplementary information regarding the model number
When the connection inlet and outlet are R-shaped male threads, the model number will be MKT□□-□TOA. Example: MKT25-3TOA
When the connection port is an R-type male thread, the model number will be MKT□□-□TOMA. Example: MKT25-3TOMA
When the connection outlet is an R-type male thread, the model number will be MKT□□-□TMOA. Example: MKT25-3TMOA
*Supplementary information regarding the model number
When the connection inlet and outlet are R-shaped male threads, the model number will be MKT□□-□TOA. Example: MKT25-3TOA
When the connection port is an R-type male thread, the model number will be MKT□□-□TOMA. Example: MKT25-3TOMA
When the connection outlet is an R-type male thread, the model number will be MKT□□-□TMOA. Example: MKT25-3TMOA
Standard specifications
Fluid | gas | ||
Connection | Rc female thread | Change to R male thread It can also be used in combination with R-type male threads. | |
Eur-lex.europa.eu eur-lex.europa.eu | Maximum 80℃ | - | |
pressure resistance | 1MPa | - | |
Material | transparent tube | Acrylic | - |
Fitting | C3604 (brass) | We can also manufacture them in stainless steel (SUS). | |
Spring | SUS304 | - | |
Nylon ball | Nylon 66 | Cylindrical floats may also be used. | |
O-ring | Nitrile rubber | - | |