Flow rate can be seen visually.
Because a transparent tapered tube is used, it is possible to check the approximate flow rate by looking at the relationship between the ball (or float) and the indicated red line.
With flow control valve
By adjusting the miniature valve and aligning the ball with the indicated red line, you can set the desired flow rate.
The mounting direction does not matter.
Because it uses a spring inside, you can freely adjust the mounting position to upward, downward, or sideways.
Because a transparent tapered tube is used, it is possible to check the approximate flow rate by looking at the relationship between the ball (or float) and the indicated red line.
With flow control valve
By adjusting the miniature valve and aligning the ball with the indicated red line, you can set the desired flow rate.
The mounting direction does not matter.
Because it uses a spring inside, you can freely adjust the mounting position to upward, downward, or sideways.
 | MKTV type download (1153KB) |
Model List
Model | Dimensions (mm) | Maximum flow rate (L/min) | |||
Connection | Length | Width | Depth | ||
MKTV25-1TA | RC1 / 8 | 94 | 25 | 51 | 150 |
MKTV25-2TA | Rc1/4 | 95 | 25 | 51 | 150 |
MKTV25-3TA | Rc3/8 | 99.5 | 25 | 51 | 200 |
When ordering or requesting a quote□Please specify your choice.
Model MKTV□□-□TA | Regular flow rate □L / min |
Example: MKTV25-2TA normal flow rate 100L/min
*For R-type male thread connections, the model number is MKTV25-□TOA. Example: MKTV25-3TOA
*For R-type male thread connections, the model number is MKTV25-□TOA. Example: MKTV25-3TOA
Standard specifications
Fluid | gas | ||
Connection | Rc female thread | Change to R male thread It can also be used in combination with an R-type male thread. | |
Eur-lex.europa.eu eur-lex.europa.eu | Maximum 80℃ | - | |
pressure resistance | 1MPa | - | |
Material | transparent tube | Acrylic | - |
Fitting | C3604 (brass) | - | |
Spring | SUS304 | - | |
Nylon ball | Nylon 66 | Cylindrical floats may also be used. | |
Miniature bulb | BC | - | |
O-ring | Nitrile rubber | - | |