The flow is visible at a glance.
A current galvanizer that checks fluid flow by observing the movement of a ball (or float) inside a transparent tube.
Flow rate cannot be confirmed.
A current galvanizer that checks fluid flow by observing the movement of a ball (or float) inside a transparent tube.
Flow rate cannot be confirmed.
With protective cover
The protective cover protects against pipe distortion and vibration.
The mounting direction does not matter.
Because it uses a spring inside, you can freely adjust the mounting position to upward, downward, or sideways.
The protective cover protects against pipe distortion and vibration.
The mounting direction does not matter.
Because it uses a spring inside, you can freely adjust the mounting position to upward, downward, or sideways.
 | PDF download (1322KB) |
Model List
Model | Dimensions (mm)[[Due to the casting surface, there may be individual variations in dimensions.] | Standard flow rate (L/min) | ||||
Connection port diameter | Length | Width | Depth | Minimum | maximum | |
MKC20-1TW | Rc1/8 | 80 | 30 | 22 | 0.6 | 6 |
MKC20-2TW | Rc1/4 | 80 | 30 | 22 | 0.6 | 6 |
MKC20-3TW | Rc3/8 | 86 | 30 | 22 | 0.6 | 6 |
MKC30-2TW | Rc1/4 | 100 | 44 | 32 | 2 | 20 |
MKC30-3TW | Rc3/8 | 104 | 44 | 32 | 2 | 20 |
MKC30-4TW | Rc1/2 | 110 | 44 | 32 | 2 | 20 |
MKC35-4TW | Rc1/2 | 124 | 49 | 44 | 5 | 30 |
MKC35-6TW | Rc3/4 | 124 | 49 | 44 | 5 | 30 |
MKC45-6TW | Rc3/4 | 142 | 62 | 50 | 15 | 60 |
MKC45-8TW | Rc1 | 142 | 62 | 50 | 15 | 60 |
*Supplementary information regarding the model number
When the connection inlet and outlet are R-shaped male threads, the model number will be MKC□□-□TOW. Example: MKC20-3TOW
When the connection port is an R-type male thread, the model number will be MKC□□-□TOMW. Example: MKC20-3TOMW
When the connection outlet is an R-type male thread, the model number will be MKC□□-□TMOW. Example: MKC20-3TMOW
When the connection port is an R-type male thread, the model number will be MKC□□-□TOMW. Example: MKC20-3TOMW
When the connection outlet is an R-type male thread, the model number will be MKC□□-□TMOW. Example: MKC20-3TMOW
Standard specifications
Fluid | Wed | ||
flow | See above | Please contact us if you require a flow rate below or above the standard specification. | |
Connection | Rc female thread | Change to R male thread It can also be used in combination with an R-type male thread. | |
Eur-lex.europa.eu eur-lex.europa.eu | Maximum 80℃ | Heat-resistant versions (up to 120°C) are also available. | |
pressure resistance | 1MPa | - | |
Material | transparent tube | Acrylic | The heat-resistant version uses Pyrex glass. |
Protective covers | CAC902 | For aluminum models, please choose the MKA type. | |
Fitting | C3604 (brass) | We can also manufacture them in stainless steel (SUS). | |
Spring | SUS304 | - | |
Nylon ball | Nylon 66 | Cylindrical floats may also be used. | |
O-ring | Nitrile rubber | The heat-resistant version uses fluororubber. | |