MK type AIR SIGNAL
I can see a flow at first sight
It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
I cannot confirm the flow quantity.
It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
I cannot confirm the flow quantity.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
I can perform sideways-facing freely.
List of models
Model
| Dimensions (mm)
| Standard specifications flow quantity
(L/min) | |||
Connection diameter
| Full length
| Overall width
| Minimum
| Maximum
| |
MK15-1TA
| Rc1/8
| 50
| 15
| 6
| 30
|
MK25-1TA
| Rc1/8
| 68
| 25
| 30
| 100
|
MK25-2TA
| Rc1/4
| 68
| 25
| 30
| 100
|
MK25-3TA
| Rc3/8
| 74
| 25
| 30
| 100
|
MK30-2TA
| Rc1/4
| 90
| 30
| 60
| 300
|
MK30-3TA
| Rc3/8
| 94
| 30
| 60
| 300
|
MK30-4TA
| Rc1/2
| 100
| 30
| 60
| 300
|
※Supplement about the model
The model in case of the R screw is MK25- a connection entrance exit □It becomes TOA. An example: MK25-3TOA
The model in case of the R screw is MK25- a connection entrance □It becomes TOMA. An example: MK25-3TOMA
The model in case of the R screw is MK25- a connection exit □It becomes TMOA. An example: MK25-3TMOA
The model in case of the R screw is MK25- a connection entrance □It becomes TOMA. An example: MK25-3TOMA
The model in case of the R screw is MK25- a connection exit □It becomes TMOA. An example: MK25-3TMOA
Standard specifications
Fluid
| Gas
| ||
Flow quantity
| Cf. list of models
| When you want, please consult anything other than standard specifications flow quantity.
| |
Connection
| Rc internal thread
| Change to R screw
The combination with the R screw is possible, too. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| I can produce the product made in SUS, too.
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
O ring
| Nitrile rubber
| -
| |
