MKC type WATER SIGNAL
I can see a flow at first sight
It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
I cannot confirm the flow quantity.
It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
I cannot confirm the flow quantity.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter
Because I use a spring inside, the posture when I attach it looks up and looks down and can perform sideways-facing freely.
List of models
Model
| Dimensions (mm)
| Standard specifications flow quantity
(L/min) | ||||
Connection diameter
| Full length
| Overall width
| Depth
| Minimum
| Maximum
| |
MKC20-1TW
| Rc1/8
| 80
| 30
| 22
| 0.6
| 6
|
MKC20-2TW
| Rc1/4
| 80
| 30
| 22
| 0.6
| 6
|
MKC20-3TW
| Rc3/8
| 86
| 30
| 22
| 0.6
| 6
|
MKC30-2TW
| Rc1/4
| 104
| 43
| 32
| 2
| 20
|
MKC30-3TW
| Rc3/8
| 104
| 43
| 32
| 2
| 20
|
MKC30-4TW
| Rc1/2
| 110
| 43
| 32
| 2
| 20
|
MKC35-4TW
| Rc1/2
| 124
| 50
| 44
| 5
| 30
|
MKC35-6TW
| Rc3/4
| 124
| 50
| 44
| 5
| 30
|
MKC45-6TW
| Rc3/4
| 142
| 62
| 50
| 15
| 60
|
MKC45-8TW
| Rc1
| 142
| 62
| 50
| 15
| 60
|
※Supplement about the model
The model in case of the R screw is MKC a connection entrance exit □* -□It becomes TOW. An example: MKC20-3TOW
The model in case of the R screw is MKC a connection entrance □* -□It becomes TOMW. An example: MKC20-3TOMW
The model in case of the R screw is MKC a connection exit □* -□It becomes TMOW. An example: MKC20-3TMOW
The model in case of the R screw is MKC a connection entrance □* -□It becomes TOMW. An example: MKC20-3TOMW
The model in case of the R screw is MKC a connection exit □* -□It becomes TMOW. An example: MKC20-3TMOW
Standard specifications
Fluid
| Water
| ||
Flow quantity
| The reference mentioned above
| When standard specifications flow quantity or less want the above, please refer.
| |
Connection
| Rc internal thread
| Change to R screw
The combination with the R screw is possible, too. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| I can produce the heat-resistant specifications (a maximum of 120 degrees Celsius), too.
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent pipe
| Acrylic
| The heat-resistant specifications become the Pyrex glass.
|
Protective cover
| BC (gunmetal)
| I can produce the product made in aluminum, too.
| |
Coupling
| C3604 (brass)
| I can produce the product made in SUS, too.
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
O ring
| Nitrile rubber
| The heat-resistant specifications become the fluorine rubber.
|