MKCT type OIL SIGNAL
It shows flow quantity by viewing
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
List of models
Model
| Dimensions (mm)
| Maximum flow quantity
(L/min) | ||||
Connection
| Full length
| Overall width
| Depth
| |||
Right?
ji Include See Form | MKCT20-1TL
| Rc1/8
| 80
| 30
| 22
| 5
|
MKCT20-2TL
| Rc1/4
| 80
| 30
| 22
| 5
| |
MKCT20-3TL
| Rc3/8
| 86
| 30
| 22
| 5
| |
MKCT30-2TL
| Rc1/4
| 104
| 43
| 32
| 10
| |
MKCT30-3TL
| Rc3/8
| 104
| 43
| 32
| 10
| |
MKCT30-4TL
| Rc1/2
| 110
| 43
| 32
| 10
| |
MKCT35-4TL
| Rc1/2
| 145
| 50
| 44
| 25
| |
MKCT35-6TL
| Rc3/4
| 145
| 50
| 44
| 25
| |
MKCT45-6TL
| Rc3/4
| 171
| 62
| 50
| 50
| |
MKCT45-8TL
| Rc1
| 171
| 62
| 50
| 50
|
Copper
Pipe Business | MKCT20-4
| φ 4
| 98
| 30
| 22
| 1.5
|
MKCT20-6
| φ 6
| 100
| 30
| 22
| 4
| |
MKCT20-8
| φ 8
| 102
| 30
| 22
| 5
| |
MKCT20-10
| φ 10
| 107
| 30
| 22
| 5
| |
MKCT30-10
| φ 10
| 126
| 43
| 32
| 10
| |
MKCT30-12
| φ 12
| 126
| 43
| 32
| 10
| |
MKCT30-14
| φ 14
| 135
| 43
| 32
| 10
|
In the case of an order, an estimate □Please appoint the inside of this.
Model
MKCT □* -□TL | Kind of the oil□
(or viscosity □ cSt of the oil) | Common use flow quantity
□L/min |
An example: Kind ISOVG32 common use flow quantity 3L/min of the MKCT20-2TL oil
※Supplement about the model
The model in case of the R screw is MKCT a connection entrance exit □* -□It becomes TOL. An example: MKCT20-3TOL
The model in case of the R screw is MKCT a connection entrance □* -□It becomes TOML. An example: MKCT20-3TOML
The model in case of the R screw is MKCT a connection exit □* -□It becomes TMOL. An example: MKCT20-3TMOL
※Supplement about the model
The model in case of the R screw is MKCT a connection entrance exit □* -□It becomes TOL. An example: MKCT20-3TOL
The model in case of the R screw is MKCT a connection entrance □* -□It becomes TOML. An example: MKCT20-3TOML
The model in case of the R screw is MKCT a connection exit □* -□It becomes TMOL. An example: MKCT20-3TMOL
Standard specifications (protest a form)
Fluid
| Oil
| ||
Connection
| Rc internal thread
| Change to R screw
The combination with the R screw is possible, too. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent taper pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| I can produce the product made in SUS, too.
| |
Protective cover
| BC
| I can produce the product made in aluminum, too.
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
O ring
| Nitrile rubber
| -
|
Standard specifications (for the copper pipe)
Fluid
| Oil
| ||
Connection
| The reference mentioned above
| -
| |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent taper pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| -
| |
Cap nut
| C3604 (brass)
| -
| |
Zipper sleeve
| Cu
| -
| |
Protective cover
| BC
| I can produce the product made in aluminum, too.
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
O ring
| Nitrile rubber
| -
|