Move to the text

MKTV type AIR SIGNAL

It shows flow quantity by viewing
  Because use a transparent taper pipe, with a ball (or a float) and the indication red line
  I can confirm approximate flow quantity by looking at the position concerned.
With flow quantity adjustment valve
  By, by adjusting a miniature valve, putting balls together at the position of the indication red line
  Setting of the necessary flow quantity is possible.
The installation direction does not matter
  Because use a spring inside, the posture when attach it looks up and look down; and
  I can perform sideways-facing freely.
 

List of models

Model
Dimensions (mm)
Maximum flow quantity
(L/min)
 Connection
Full length
Overall width
Depth
MKTV25-1TA
RC1/8
94
25
51
150
MKTV25-2TA
Rc1/4
94
25
51
150
MKTV25-3TA
Rc3/8
94
25
51
200
In the case of an order, an estimatePlease appoint the inside of this.
 
Model
MKTV □* -TA
Common use flow quantity
L/min
An example: MKTV25-2TA common use flow quantity 100L/min
※The model in case of the connection R screw is MKTV25- □It becomes TOA. An example: MKTV25-3TOA

Standard specifications

Fluid
Gas
Connection
Rc internal thread 
Change to R screw
The combination with the R screw is possible, too.
 Heat-resistant temperature
A maximum of 80 degrees Celsius
-
Withstand pressure
1MPa
-
Materials
Transparent pipe
Acrylic
-
Coupling
C3604 (brass)
-
Spring
SUS304
-
Nylon ball
Nylon 66
I may use a cylindrical float.
Miniature valve
BC 
-
 O ring
Nitrile rubber 
-
MAEDA KOKI
〒185-00140
4-15-3, Higashikoigakubo, Kokubunji-shi, Tokyo
TEL. 042-321-4831
FAX. 042-325-4298
Production sale of the appliance to flow control
Back to TOP