MKTV type OIL SIGNAL
It shows flow quantity by viewing
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With flow quantity adjustment valve
By adjusting a miniature valve a ball (or a float) at the position of the indication red line
Setting of the flow quantity that is necessary by putting it together is possible.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With flow quantity adjustment valve
By adjusting a miniature valve a ball (or a float) at the position of the indication red line
Setting of the flow quantity that is necessary by putting it together is possible.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
List of models
Model
| Dimensions (mm)
| Maximum flow quantity
(L/min) | ||||
Connection
| Full length
| Overall width
| Depth
| |||
Right?
ji Include See Form | MKTV25-1TL
| Rc1/8
| 94
| 25
| 51
| 3
|
MKTV25-2TL
| Rc1/4
| 94
| 25
| 51
| 3
| |
MKTV25-3TL
| Rc3/8
| 99
| 25
| 51
| 3
|
Copper
Pipe Business | MKTV25-4
| φ 4
| 110
| 25
| 51
| 1.5
|
MKTV25-6
| φ 6
| 112
| 25
| 51
| 3
| |
MKTV25-8
| φ 8
| 114
| 25
| 51
| 5
| |
MKTV25-10
| φ 10
| 119
| 25
| 51
| 5
|
In the case of an order, an estimate □Please appoint the inside of this.
Model
MKTV □* -□TL | Kind of the oil□
(or viscosity □ cSt of the oil) | Common use flow quantity
□L/min |
An example: Kind ISOVG32 common use flow quantity 3L/min of the MKTV25-2TL oil
※The model in case of the connection R screw is MKTV25- □It becomes TOL. An example: MKTV25-3TOL
※The model in case of the connection R screw is MKTV25- □It becomes TOL. An example: MKTV25-3TOL
Standard specifications (protest a form)
Fluid
| Oil
| ||
Connection
(the exit side) | Rc internal thread
| The change to R screw is possible, too.
The connection of the valve becomes only the R screw. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent taper pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| -
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
Miniature valve
| BC
| The production at the valve with the check nut is possible, too.
|
Standard specifications (for the copper pipe)
Fluid
| Oil
| ||
Connection
(the exit side) | The reference mentioned above
| -
| |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent taper pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| -
| |
Cap nut
| C3604 (brass)
| -
| |
Zipper sleeve
| Cu
| -
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
Miniature valve
| BC
| -
|