MKT type OIL SIGNAL
It shows flow quantity by viewing
Because I use a transparent taper pipe, I can confirm approximate flow quantity by looking at a ball (or a float) and the position with the indication red line concerned.
The installation direction does not matter
Because I use a spring inside, the posture when I attach it looks up and looks down and can perform sideways-facing freely.
Because I use a spring inside, the posture when I attach it looks up and looks down and can perform sideways-facing freely.
Model
| Dimensions (mm)
| Maximum flow quantity
(L/min) | |||
Connection diameter
| Full length
| Overall width
| |||
Right?
ji Include See Form | MKT25-1TL
| Rc1/8
| 78
| 25
| 5
|
MKT25-2TL
| Rc1/4
| 78
| 25
| 5
| |
MKT25-3TL
| Rc3/8
| 84
| 25
| 5
| |
MKT30-2TL
| Rc1/4
| 104
| 30
| 10
| |
MKT30-3TL
| Rc3/8
| 104
| 30
| 10
| |
MKT30-4TL
| Rc1/2
| 110
| 30
| 10
|
Copper
Pipe Business | MKT25-4
| φ 4
| 96
| 25
| 1.5
|
MKT25-6
| φ 6
| 98
| 25
| 3
| |
MKT25-8
| φ 8
| 100
| 25
| 5
| |
MKT25-10
| φ 10
| 105
| 25
| 5
|
In the case of an order, an estimate □Please appoint the inside of this.
Model
MKT □* -□TL | Kind of the oil□
(or viscosity □ cSt of the oil) | Common use flow quantity
□L/min |
An example: Kind ISOVG32 common use flow quantity 3L/min of the MKT25-2TL oil
※Supplement about the model
The model in case of the R screw is MKT a connection entrance exit □* -□It becomes TOL. An example: MKT25-3TOL
The model in case of the R screw is MKT a connection entrance □* -□It becomes TOML. An example: MKT25-3TOML
The model in case of the R screw is MKT a connection exit □* -□It becomes TMOL. An example: MKT25-3TMOL
※Supplement about the model
The model in case of the R screw is MKT a connection entrance exit □* -□It becomes TOL. An example: MKT25-3TOL
The model in case of the R screw is MKT a connection entrance □* -□It becomes TOML. An example: MKT25-3TOML
The model in case of the R screw is MKT a connection exit □* -□It becomes TMOL. An example: MKT25-3TMOL
Standard specifications (protest a form)
Fluid
| Oil
| ||
Connection
| Rc internal thread
| Change to R screw
The combination with the R screw is possible, too. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent taper pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| I can produce the product made in SUS, too.
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
|
Standard specifications (for the copper pipe)
Fluid | Oil
| ||
Connection
| The reference mentioned above
| -
| |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent taper pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| -
| |
Cap nut
| C3604 (brass)
| -
| |
Zipper sleeve
| Cu
|
- | |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
|