MKCT type AIR SIGNAL
It shows flow quantity by viewing
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter
Because use a spring inside, the posture when attach it looks up and look down; and
I can perform sideways-facing freely.
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter
Because use a spring inside, the posture when attach it looks up and look down; and
I can perform sideways-facing freely.
Model
| Dimensions (mm)
| Maximum flow quantity
(L/min) | |||
Connection
| Full length
| Overall width
| Depth
| ||
MKCT20-1TAR
| Rc1/8
| 80
| 30
| 22
| 200
|
MKCT20-2TAR
| Rc1/4
| 80
| 30
| 22
| 200
|
MKCT20-3TAR
| Rc3/8
| 86
| 30
| 22
| 200
|
MKCT30-2TAR
| Rc1/4
| 104
| 43
| 32
| 500
|
MKCT30-3TAR
| Rc3/8
| 104
| 43
| 32
| 500
|
MKCT30-4TAR
| Rc1/2
| 110
| 43
| 32
| 500
|
MKCT35-4TAR
| Rc1/2
| 145
| 50
| 44
| 1000
|
MKCT35-6TAR
| Rc3/4
| 145
| 50
| 44
| 1000
|
MKCT45-6TAR
| Rc3/4
| 171
| 62
| 50
| 2000
|
MKCT45-8TAR
| Rc1
| 171
| 62
| 50
| 2000
|
In the case of an order, an estimate □Please appoint the inside of this.
Model
MKCT □* -□TAR | Common use flow quantity
□L/min |
An example: MKCT20-2TAR common use flow quantity 100L/min
※Supplement about the model
The model in case of the R screw is MKCT a connection entrance exit □* -□It becomes TOAR. An example: MKCT20-3TOAR
The model in case of the R screw is MKCT a connection entrance □* -□It becomes TOMAR. An example: MKCT20-3TOMAR
The model in case of the R screw is MKCT a connection exit □* -□It becomes TMOAR. An example: MKCT20-3TMOAR
※Supplement about the model
The model in case of the R screw is MKCT a connection entrance exit □* -□It becomes TOAR. An example: MKCT20-3TOAR
The model in case of the R screw is MKCT a connection entrance □* -□It becomes TOMAR. An example: MKCT20-3TOMAR
The model in case of the R screw is MKCT a connection exit □* -□It becomes TMOAR. An example: MKCT20-3TMOAR
Standard specifications
Fluid
| Gas
| ||
Connection
| Rc internal thread
| Change to R screw
The combination with the R screw is possible, too. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| I can produce the product made in SUS, too.
| |
Protective cover
| BC
| I can produce the product made in aluminum, too.
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
O ring
| Nitrile rubber
| -
| |
