MKCTV type AIR SIGNAL
It shows flow quantity by viewing
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With flow quantity adjustment valve
By, by adjusting a miniature valve, putting balls together at the position of the indication red line
Setting of the necessary flow quantity is possible.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
With flow quantity adjustment valve
By, by adjusting a miniature valve, putting balls together at the position of the indication red line
Setting of the necessary flow quantity is possible.
With protective cover
By a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
Model
| Dimensions (mm)
| Maximum flow quantity
(L/min) | |||
Connection
| Full length
| Overall width
| Depth
| ||
MKCTV20-1TA
| Rc1/8
| 115
| 30
| 22
| 150
|
MKCTV20-2TA
| Rc1/4
| 115
| 30
| 22
| 150
|
MKCTV20-3TA
| Rc3/8
| 122
| 30
| 25
| 200
|
In the case of an order, an estimate □Please appoint the inside of this.
Model
MKCTV □* -□TA | Common use flow quantity
□L/min |
An example: MKCTV20-2TA common use flow quantity 100L/min
※The model in case of the connection R screw is MKCTV20- □It becomes TOA. An example: MKCTV20-3TOA
※The model in case of the connection R screw is MKCTV20- □It becomes TOA. An example: MKCTV20-3TOA
Standard specifications
Fluid
| Gas
| ||
Connection
| Rc internal thread
| Change to R screw
The combination with the R screw is possible, too. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| -
| |
Protective cover
| BC (gunmetal)
| -
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
O ring
| Nitrile rubber
| -
| |
Miniature valve
| BC
| The production at the valve with the check nut is possible, too.
| |
