MKTV type WATER SIGNAL
[it shows flow quantity by viewing]
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
[with the flow quantity adjustment valve]
By, by adjusting a miniature valve, putting balls together at the position of the indication red line
Setting of the necessary flow quantity is possible.
[the installation direction does not matter]
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
Because use a transparent taper pipe, with a ball (or a float) and the indication red line
I can confirm approximate flow quantity by looking at the position concerned.
[with the flow quantity adjustment valve]
By, by adjusting a miniature valve, putting balls together at the position of the indication red line
Setting of the necessary flow quantity is possible.
[the installation direction does not matter]
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
List of models
Model
| Dimensions (mm)
| Standard specifications flow quantity
(about L/min) | Flow quantity curve list
※Standard specifications (PDF documents) | |||
Connection
| Full length
| Overall width
| Depth
| |||
MKTV25-1TW
| RC1/8
| 94
| 25
| 51
| 1-5
|  |
MKTV25-2TW
| Rc1/4
| 94
| 25
| 51
| ||
MKTV25-3TW
| Rc3/8
| 99
| 25
| 51
| ||
In the case of an order, an estimate □Please appoint the inside of this.
Model
MKTV □* -□TW | Common use flow quantity
□L/min |
An example: MKTV25-2TW common use flow quantity 3L/min
※The model in case of the connection R screw is MKTV25- □It becomes TOW. An example: MKTV25-3TOW
※The model in case of the connection R screw is MKTV25- □It becomes TOW. An example: MKTV25-3TOW
Fluid
| Water
| ||
Flow quantity
| The reference mentioned above
| When standard specifications flow quantity or less want the above, please refer.
| |
Connection
| Rc internal thread
| Change to R screw
The combination with the R screw is possible, too. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| -
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
| |
Miniature valve
| BC
| -
| |
O ring
| Nitrile rubber
| -
| |
