MK type OIL SIGNAL
I can see a flow at first sight
It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
I cannot confirm the flow quantity.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
I cannot confirm the flow quantity.
The installation direction does not matter
The posture when attach it as use a spring inside looks up and look down; and
I can perform sideways-facing freely.
List of models
Model
| Dimensions (mm)
| Example
VG68 40 degrees Celsius Of this a case (L/min) | |||
Connection diameter
| Full length
| Overall width
| Minimum
| Maximum
| |
MK15-1TL
| Rc1/8
| 50
| 15
| 0.005
| 0.5
|
MK25-1TL
| Rc1/8
| 68
| 25
| 0.05
| 5
|
MK25-2TL
| Rc1/4
| 68
| 25
| 0.3
| 5
|
MK25-3TL
| Rc3/8
| 74
| 25
| 0.3
| 5
|
MK30-2TL
| Rc1/4
| 90
| 30
| 1.5
| 10
|
MK30-3TL
| Rc3/8
| 94
| 30
| 1.5
| 10
|
MK30-4TL
| Rc1/2
| 100
| 30
| 1.5
| 10
|
※Supplement about the model
The model in case of the R screw is MK25- a connection entrance exit □It becomes TOL. An example: MK25-3TOL
The model in case of the R screw is MK25- a connection entrance □It becomes TOML. An example: MK25-3TOML
The model in case of the R screw is MK25- a connection exit □It becomes TMOL. An example: MK25-3TMOL
The model in case of the R screw is MK25- a connection entrance □It becomes TOML. An example: MK25-3TOML
The model in case of the R screw is MK25- a connection exit □It becomes TMOL. An example: MK25-3TMOL
Standard specifications
Fluid
| Oil
| ||
Connection
| Rc internal thread
| Change to R screw
The combination with the R screw is possible, too. | |
Heat-resistant temperature
| A maximum of 80 degrees Celsius
| -
| |
Withstand pressure
| 1MPa
| -
| |
Materials
| Transparent pipe
| Acrylic
| -
|
Coupling
| C3604 (brass)
| I can produce the product made in SUS, too.
| |
Spring
| SUS304
| -
| |
Nylon ball
| Nylon 66
| I may use a cylindrical float.
|